Product Categories
contact us

Jiangsu Lanming Environmental Protection Technology Co., Ltd. Tel: 0510-87018530
Fax: 0510-87018530
Mr. Zhou: 13506157228
Ms. Xu: 13921338925
Address: Yuedong Road, Huankeyuan, Yixing City, Jiangsu Province

News Center
Introduction of five types of incinerators
Hits: 132 times Added: 2019-11-25 [ Print ] [ Return ] [ Favorite ]

Environmental protection is now promoted. When human beings continue to use natural resources to create a material civilization, a large amount of garbage is also produced. Then, the disposal of garbage has become a major problem in modern society. The evolution of incinerators has enabled more efficient recycling of waste. There are several types of incinerators:

1.Pulse throwing grate incinerator

The garbage is sent to the drying bed of the incinerator by the automatic feeding unit to be dried, and then sent to the first-stage grate. The grate is volatilized and cracked at high temperature. The grate is thrown by the impulse aerodynamic device to remove the garbage The stage is thrown into the next grate, at which time the polymer material is cracked and other materials are burned.

2.Mechanical grate incinerator

The garbage enters the inclined grate through the feeding hopper (the grate is divided into a drying zone, a burning zone, and a burn-out zone). Due to the staggered movement between the grate, the garbage is pushed downward, so that the garbage passes through the grate in turn. Each area (when the garbage enters from one area to another, it plays a role of turning over) until it is exhausted and discharged from the furnace. Combustion air enters from the lower part of the grate and is mixed with garbage; high-temperature flue gas generates hot steam through the heating surface of the boiler, and the flue gas is also cooled, and finally the flue gas is discharged after being processed by the flue gas processing device.

3. Fluidized bed incinerator

The furnace body is composed of a porous distribution plate. A large amount of quartz sand is added in the furnace, the quartz sand is heated to above 600 C, and hot air above 200 C is blown into the bottom of the furnace, so that the hot sand is boiled, and then thrown into garbage. The garbage boils with the hot sand, and the garbage is quickly dried, caught on fire, and burned. The proportion of unburned garbage is lighter, and it continues to boil and burn. The proportion of burned garbage is large, and it falls to the bottom of the furnace. After water cooling, the coarse slag and fine slag are sent to the outside of the plant by using sorting equipment. A small amount of medium slag and The quartz sand is returned to the furnace through the lifting equipment for continued use.

4.Rotary incinerator

Rotary incinerators are arranged along the furnace body with cooling water pipes or refractory materials. The furnace body is placed horizontally and slightly inclined. Through the non-stop operation of the furnace body, the garbage in the furnace body is fully burned, and at the same time, it is moved to the direction in which the furnace body is inclined until it is burned out and discharged from the furnace body.

5.CAO incinerator

The garbage is transported to the storage tank, enters the biochemical treatment tank, and is dehydrated under the action of microorganisms to decompose the natural organic matter (kitchen waste, leaves, grass automatic waste power generation crane, automatic waste power generation crane, etc.) into powder, other solids including plastic rubber One type of synthetic organic matter and inorganic matter in garbage cannot be decomposed and powdered.