Product Categories
contact us

Jiangsu Lanming Environmental Protection Technology Co., Ltd. Tel: 0510-87018530
Fax: 0510-87018530
Mr. Zhou: 13506157228
Ms. Xu: 13921338925
Website: shoelessnz.com
Email: jslmhb5383@163.com
Address: Yuedong Road, Huankeyuan, Yixing City, Jiangsu Province

Product center
Organic wastewater and waste liquid incinerator
Hits: 1107 times Added: 2019-5-10 [ Print ] [ Return ] [ Favorite ]

Overview: In the production process of chemical companies, a large amount of organic wastewater and waste liquid will be generated. Most of them can be treated by conventional biochemical or physical methods, but there are still a small amount of high-concentration wastewater and waste liquid. Its COD reaches hundreds of thousands or even millions, and some high-concentration wastewater and waste liquid contain fluorine. , Inorganic salts, etc., traditional water treatment methods can do nothing about it, and waste liquid incineration is the best solution.




In the production process of chemical enterprises, a large amount of organic wastewater and waste liquid will be generated. Most of them can be treated by conventional biochemical or physical methods, but there are still a small amount of high-concentration wastewater and waste liquid. Its COD reaches hundreds of thousands or even millions, and some high-concentration wastewater and waste liquid contain fluorine. , Inorganic salts, etc., traditional water treatment methods can do nothing about it, and waste liquid incineration is the best solution.

Features:

Our company's waste liquid incinerator is professionally designed according to the characteristics of various types of wastewater, and has strong pertinence. The characteristics are as follows:

(1) Adopt tangential atomization device-internal hybrid dual-fluid atomizer, its mixing degree, atomization effect, combustion speed and efficiency are extremely high, and the excess air coefficient is low, which can save a lot of fuel; the diameter of the atomizing nozzle is large Low viscosity and impurity content of the fluid, not easy to block; Low pressure spray method, high pressure spray gun type safety, not easy to wear, not easy to malfunction, good combustion effect, atomizing medium can use low pressure steam or air;
(2) High combustion safety. The control logic program is provided with a function that cannot ignite without igniting explosive gases before ignition in the furnace to prevent gas explosion. A flame detector is provided. Once a flameout or ignition failure occurs in the furnace, Automatically cut off fuel and waste liquid supply immediately, complete alarm system, safe and reliable;
(3) According to the composition and characteristics of wastewater, design incinerators with different shapes and furnace linings; design different furnace temperature control methods according to the salt content of wastewater to ensure that inorganic salts are not wall-mounted in the furnace during incineration and rarely form The salt mist floats out of the furnace; the dust and acid gases generated during the incineration process are treated in an economical and reasonable manner, which fully guarantees that no new pollution will form after the waste liquid is incinerated;
(4) Full consideration of waste heat utilization after waste liquid incineration can generate steam, hot water or hot air for production use;
(5) Waste liquid incinerator can handle organic waste gas and a small amount of solid waste while processing waste liquid.

Suitable scope:

1. Non-combustible high-concentration wastewater, waste liquid, organic acids, organic alkalis, etc .;
2. Flammable waste liquid, solvent, etc.

Wastewater treatment capacity: 50 ~ 11000㎏ / h