Product Categories
contact us

Jiangsu Lanming Environmental Protection Technology Co., Ltd. Tel: 0510-87018530
Fax: 0510-87018530
Mr. Zhou: 13506157228
Ms. Xu: 13921338925
Website: shoelessnz.com
Email: jslmhb5383@163.com
Address: Yuedong Road, Huankeyuan, Yixing City, Jiangsu Province

Product center
Rotary kiln
Number of hits: 2960 Add time: 2018-2-9 [ Print ] [ Return ] [ Favorite ]

Summary: The rotary combined hazardous waste kiln treatment system is based on the traditional rotary kiln incinerator, and the advanced incineration equipment independently developed by the company has achieved good results in strengthening heat exchange and combustion. The system is equipped with special enhanced heat exchange equipment, which overcomes the shortcomings of inadequate contact between the air and waste in the traditional rotary kiln, resulting in waste heat exchange and poor combustion effects. At the same time, the system also has the function of preventing slagging in the furnace. The combustion chamber is equipped with enhanced combustion equipment to fully burn the ash and slag entering the second combustion chamber, which improves the thermal efficiency of the system, and at the same time has the comprehensive functions of cooling and crushing slag and automatic slag discharge.



The rotary combination hazardous waste kiln treatment system is based on the traditional rotary kiln incinerator and the advanced incineration equipment independently developed by the company, which has achieved good results in strengthening heat exchange and combustion. The system is equipped with special enhanced heat exchange equipment, which overcomes the shortcomings of inadequate contact between the air and waste in the traditional rotary kiln, resulting in waste heat exchange and poor combustion effects. At the same time, the system also has the function of preventing slagging in the furnace. The combustion chamber is equipped with enhanced combustion equipment to fully burn the ash and slag entering the second combustion chamber, which improves the thermal efficiency of the system, and at the same time has the comprehensive functions of cooling and crushing slag and automatic slag discharge.

Features:

(1) This equipment can burn solid waste, liquid, colloid and gas at the same time, and has strong adaptability to the incineration;
(2) The incineration material is tumbling forward, three heat transfer methods coexist in one furnace, and the heat utilization rate is high;
(3) High-temperature materials contact refractory materials, it is convenient to replace the furnace lining, and the cost is low;
(4) The transmission mechanism is simple, the transmission mechanism is in the kiln shell, and the equipment maintenance is simple;
(5) The requirements for the shape and moisture content of the incineration are not high;
(6) The residence time in the rotary kiln is up to 1 hour and the high temperature of 700 C, so that the hazardous waste is basically burned out; the strong gas mixture in the second combustion chamber makes the incomplete combustion in the flue gas completely burn to achieve the decomposition of harmful components. High temperature (1100 ℃), the residence time of smoke in the high temperature area is 2 seconds; not only the waste is burned and burned, but also the source of dioxin is avoided or reduced;
(7) Good sealing measures and negative pressure in the furnace to ensure that harmful gases are not leaked;
(8) The equipment operation rate is high, and the annual operation rate can generally reach 90%; the operation and maintenance are convenient;
(9) An enhanced heat exchange and slagging prevention device was added in the rotary kiln to increase the efficiency of the incinerator to the waste while increasing the efficiency of incineration;
(10) Combined with patented technology, the traditional second-combustion chamber was transformed into a second-combustion furnace, which improved the burnout rate of ash and slag, and increased the incineration efficiency of the rotary kiln. Features.

Scope of application:

1. Various hazardous industrial waste residues, medical waste, domestic waste, etc.
2. Various polymer wastes such as sludge, slurry, plastic, rubber grease residue, asphalt.
3. High concentration waste liquid, waste water, waste solvent, etc.

Capacity: 100㎏ / h ~ 5000㎏ / h.