Jiangsu Lanming Environmental Protection Technology Co., Ltd. Tel: 0510-87018530
Mr. Zhou: 13506157228
Ms. Xu: 13921338925
Address: Yuedong Road, Huankeyuan, Yixing City, Jiangsu Province
Overview: The direct heat exchange of heat storage materials is a new technology only introduced in the 1990s abroad; our company has developed a multi-compartment type with independent intellectual property rights based on the principles of heat storage and heat exchange and thermal incineration technology. Backblow regenerative incinerator; suitable for the treatment of organic waste gas with low concentration and high air volume of catalysts with complex composition, containing corrosive or halogen, sulfur, phosphorus, arsenic and other catalysts. Some special smells. This furnace type has advanced technology, long-term stable operation, low operating cost, and the system realizes PLC automatic control.
The direct heat exchange of heat storage materials is a new technology only introduced in the 1990s abroad. Based on the principle of heat storage and heat incineration, our company has developed a multi-chamber backflush with independent intellectual property rights. Regenerative incinerator; suitable for the treatment of organic waste gas with low concentration and large air volume, with complex composition, containing corrosive or halogen, sulfur, phosphorus, arsenic and other catalysts. Smelly. This furnace type has advanced technology, long-term stable operation, low operating cost, and the system realizes PLC automatic control.
(1) Adopting a regenerative heat exchange device, the heat storage carrier and gas directly exchange heat, the furnace has a large radiation temperature and pressure, and the heating speed is fast; the low temperature heat exchange effect is remarkable, so the heat exchange efficiency is particularly high, and the combustion products are recovered to a large extent. High thermal efficiency, low smoke exhaust temperature, and significant energy saving effects. Reducing fuel consumption also means reducing greenhouse gas emissions;
(2) The temperature in the heat storage chamber is evenly increased, which strengthens the heat transfer in the furnace and improves the heat exchange effect. Therefore, the furnace volume of the incinerator with the same throughput can be reduced, which greatly reduces the cost of the equipment;
(3) Because the flame is not generated in the burner, it starts to burn gradually in the high-temperature heat storage body in the furnace without a high-temperature front, so the combustion noise is low;
(4) The high-temperature flame combustion area is enlarged, and the boundary of the flame is almost extended to the boundary of the furnace, so that the temperature in the furnace is uniform, which improves the purification efficiency on the one hand and extends the life of the furnace on the other hand;
(5) The thermodynamic conditions are completely different from the traditional combustion process. The staged combustion technology is used to delay the release of thermal energy under combustion; the temperature rise in the furnace is uniform, the burning loss is low, and the heating effect is good. There is no local high temperature in the traditional combustion process High oxygen zone, inhibits the generation of thermal nitrogen oxides (NOX), and has good environmental protection effect;
(6) The overall temperature in the combustion chamber rises and the distribution becomes more uniform; the furnace temperature can be as high as 850 to 1100 ¡ã C, the airflow speed is large, the combustion speed is fast, the flue gas stays in the furnace for a long time at a high temperature, the organic matter is completely oxidized and decomposed, and the environmental protection effect Significantly
(7) The system adopts PLC automatic combustion control, with high degree of automation, stable operation, high safety and reliability;
(8) According to the exhaust gas conditions, a thermal energy recovery device can be reasonably set up. A high-temperature combustion chamber is connected to a heat-conducting oil furnace or a waste heat boiler. The low-temperature flue gas is used to heat the exhaust gas and make full use of the waste heat in the exhaust gas.
Scope of application: low concentration, large air volume of organic waste gas, in the production process does not recover or recover a small amount of heat energy occasions.